top of page

Calibration Hoses

Light duty green.JPG

Light Duty

​​

  • Available in diameters from DN 50 to 250

  • Ideal for ambient-curing resins

  • Perfect for lateral connections

  • Performing bends up to 90°

Calibration hoses violet.JPG

Medium Duty

​​

  • Available in diameters from DN 50 to 200

  • Ideal for ambient-curing resins

  • Perfect for lateral connections

  • Performing bends up to 90°

  • Heat resistance: max. 50°C

  • Installation pressure: max. 0,5 bar

heavy duty.JPG

Heavy Duty

​​

  • Available in diameters from DN 100 to 300

  • Ideal for hot water or steam curing

  • For main lines and house lining

  • Performing bends up to 90°

  • High temperature resistant:  

  • 80°C water / 100°C steam

  • Can also be used as liner end cap

Transparent.JPG

Transparent

​

  • Transparent calibration hose is used in pipelining installations in the so-called open-end method to

  • Helps to press an impregnated liner onto the walls of the pipes

  • Performing bends up to 90° 

  • Protects the liner from sharp edges 

  • UV-LED curing possible

Preliner.JPG

Pre-Liners

​Pre-liner needs to be used if there is infiltration of groundwater

​

  • Excellent strength properties, and good leakage and puncture resistance

  • Preliner protects the liner with epoxy from water infiltration and sharp edges

  • Always use Pre-liner in the concrete and clay pipes to prevent any damage caused by the water coming outside the pipe

  • The use of the Pre-liner reduces the risk of liner breakage in plastic sewer lines

End Cap Glue.JPG

End Cap Glue

​

  • Fast binding with excellent strength

  • One-component adhesive

  • Colorless

  • Excellent heat resistance

  • Excellent water resistant seam

bottom of page